MikroTik Routerboard


The RB951-2n is the home wireless AP you have been waiting for! It is small and compact, has five Ethernet ports and a 802.11b/g/n wireless AP with an antenna built in.

This model is much smaller than the more powerful RB751U-2HnD model, the RB951-2n looks exactly like our popular RB750 series. The device is very small and will look good in any home or office, wall mounting anchor holes are provided.

Box contains: RB951-2n, plastic case, power supply

R951-2n ad:

Product specifications

Product code RB951-2n
CPU nominal frequency 400 MHz
CPU core count 1
Size of RAM 32 MB
Architecture MIPS-BE
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 0
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9331-AL1A
Wireless standards 802.11b/g/n
Number of USB ports 0
Power Jack 8-30V DC
802.3af support No
PoE 8-28V DC on Ether1
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Dimensions 113x89x28mm
Operating temperature range -20C .. +50C
License level Level4
Antenna gain DBI 1.5dBi
Current Monitor No
TX power 17dBm
Max Power consumption 3W
SFP ports 0
Number of chains 1

Included parts

Performance test results

RB951-2n (400Mhz) 100M port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 146.7 96.2 112.4 476.6 40.0 491.5
Bridging 25 bridge filter rules 49.6 32.5 49.1 208.2 40.0 491.5
Routing none (fast path) 142.4 93.4 106.6 451.9 40.0 491.5
Routing 25 simple queues 80.3 52.7 76.9 326.1 40.0 491.5
Routing 25 ip filter rules 35.8 23.5 35.7 151.4 33.2 408.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results